Soluciones

How to Permanently Fix a Broken Waterpik Hose


Nuevo video ¡¡¡ sobre oral b reparar ,aqui en este sitio encontraras las mejores soluciones para poder reparar tu notebook y de forma gratuita ,te pedimos que si te sirvio la informacion nos compartas por las redes sociales y des me gusta al video un saludo y hasta el proximo post o publicacion

▷Repair (and improve) a broken Waterpik hose



HOLA TE OFRECEMOS ESTE VIDEO PARA VERLO DE FORMA ONLINE 🎬 Y DISPONIBLE PARA LA DESCARGA 💽

CANTIDAD DE VISITAS QUE TUVO EL VIDEO : 51124 PERSONAS LO VIERON

RATING : 4.49 ⋆⋆⋆⋆⋆

DURACION DEL VIDEO 3:52 🎥

FECHA EN LA QUE SE SUBIO EL VIDEO 2016-11-21 20:59:46 📅

CUANTOS ME GUSTA OBTUVO 176 👍


Te informamos que los estrenos más esperados. Las mejores Películas de la historia, tus series favoritas ANIME, ya puedes mirarlas aquí!

La aparición del cine ocurre el 28 de diciembre de 1895, y se atribuye a los hermanos Lumiére, que proyectaron imágenes en movimiento frente a un auditorio. El suceso provocado por el invento, llevó a una rápida evolución del mismo, y para 1899, ya se había producido un filme de 15 minutos.

Movies Completas en HD Audio Latino Subtituladas y español. Totalmente Gratis!

El cine es una técnica de proyectar fotogramas en una secuencia rápida que simula el movimiento. La palabra cine, viene del griego y significa movimiento.
La demanda creciente fue cubierta con cientos de películas al año, en su mayoría, westerns, comedias de pastelazos y melodramas elegantes.

Aquí podrás encontrar Películas de todos los géneros, tipos y países. Cristianas de acción. Románticas, Drama, Comedia, terror, de suspenso. Películas sin cortes, documentales, Clásicas Online. Aquí cine gratis, películas en línea, movies en español castellano, latino, subtitulado y HD.

El cine ha logrado entrar, colocarse y permanecer como parte de las actividades del ser humano. En la actualidad cuenta con el suficiente apoyo financiero al implicarse como industria comercial, a elaborado planes extremos de difusión y publicidad que le permiten obtener resultados satisfactorios para generar cada vez mayor asistencia y lograr uno de sus objetivos que es la obtención de ganancia.

Haz apreciado una de nuestras Películas Favoritas Y deseamos todo sea de tu total agrado, colabóranos con un Like y Compártela si te ha gustado. Próximamente… Más Estrenos 2016 🙂

Ahora aquí puedes verlas sin costos, no te pierdas de las mejores pelis!

Como ejemplo el llamado cine independiente hace referencia a todas aquellas películas que se realizan, o se han realizado, al margen de los circuitos comerciales y de producción habituales. La característica principal de una película independiente es que no ha sido producida por los grandes estudios cinematográficos y, en Estados Unidos, que no ha sido producida con personal afiliado a los poderosos sindicatos del gremio.

Deseamos todo sea de tu total agrado, colabóranos con un Like y Compártela si te ha gustado. Próximamente… Más Estrenos 2016.

Generalmente una película independiente es una producción de bajo presupuesto de una productora pequeña.
Hoy en día, la nueva generación de cámaras digitales contribuye a que sea aún más fácil realizar este tipo de películas y, por tanto, a una creciente popularidad de este tipo de producciones.
Un tutorial es una lección educacional que conduce al usuario a través de la características y funciones más importantes de cosas como aplicaciones de software, dispositivos de hardware, procesos, diseños de sistema y lenguajes de programación.
Un tutorial normalmente consiste en una serie de pasos que van aumentando el nivel de dificultad y entendimiento. Por este motivo, es mejor seguir los tutoriales en su secuencia lógica para que el usuario entienda todos los componentes.
El término se utiliza mucho en Internet, ya que hay muchos sitios web que ofrecen tutoriales, desde cómo codificar en html a cómo hacer que una tarjeta gráfica funcione más rápido (overclocking). Aunque un tutorial también puede presentarse en impreso en papel, el término se utiliza normalmente para referirse a los programas de aprendizaje online.

About the author

admin

24 Comments

Click here to post a comment

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

  • I purchased a replacement wand / hose assembly (WyFun Oral Hygiene Accessories Standard Water Hose Plastic Handle for Waterpik Oral Irrigator Wp-100 Wp-450 Wp-660 Wp-900
    Sold by: VinYBan) .
    After the simple procedure of replacing the new parts I also noticed a dramatic loss in water pressure at the tips. After looking at some YouTube videos on how to dissemble the old handle to make repairs. My hose was to brittle and super glue melted the hose. I then took another look and compared the old and new assemblies to see what could cause the loss of pressure. The part that has the ears for screws has a much smaller water inlet hole than the old one. I simply removed that part from the original hose and put in on the new hose. Wa-La , Pressure restored! Look out for the little flexible flap that sits between the water outlet and the water inlet part.

  • Still great video. Opening was a bit tricky. Plastic is too soft for twisting open at the respective places seing that the small bolts must be tear-broken. Therefore had to find a spot where to stick a small screw driver really inside the covering and from there prying open the covering going alongside it. – There is another spring just below the head-part you popp of first. It is not seen in this video. Maybe it still sticks in the head-part. Mine sprang out as the head-part came off. No problem to put it back. Thanks man!

  • Would be good to know what issue you were experiencing first. Mine all of a sudden didn't have the same pressure at a 10 setting. The hoses aren't leaking or anything. But I don't know if that's what your issue was because you don't state or show what your device was doing.

  • the rubber seals wear out, eventually. Because constant exposure to water, and contaminates, it wears them out, that's what happened to my Interplak WJ6RW unit. it no longer had water pressure, and the pick got stuck in it. the seal was deteriorating. I took the head apart, and I tried cleaning with hydrogen peroxide, black goo came off the seal.

    One fix is to remove the push button cutout switch, that way, that eliminates one point of failure. And you use the on/off switch on base to terminate water jet flow. I'll have to find some tiny O-rings for it

  • Don't waste your time on this. When using the waterpik if you press the button to stop the flow, there is a huge amount of pressure in the hose and it just slips right out of the outer tube. When it failed thus, I first tried Uhu (PVC) glue (failed) then super glue (also failed). Patching with an outer tube will not withstand the pressure!!! The original hose is attached, inside the handle by sliding onto a toothed flange, and then reinforced with an outer compression collar to keep it there snug around the teeth. Don't waste your time on this. You'll do better sliding back the ring on the bit of tube remaining in the handle, removing that bit of broken tube, sliding the ring onto what remains of the original tube still attached to the handle, and sliding it onto the toothed connector, and finally sliding the compression ring back into place to reinforce the connection. Better yet: five bucks on ebay gets you a complete unit straight from China, where they're made.

  • Bought 2mm inner diameter x 4mm outer diameter "food grade" plastic tube. Sort of works. I have a WP130 and if I turn it up past 5 on the pressure setting, the hose will blow out from the underside or split at the handheld side….particularly when you hit off on the handheld and the pump still runs. Wasted $5 on the fix so now the $30 replacement part will end up costing me $35.

  • If you need to get a hose to go over the original hose, a 7/64 vacuum/windshield washer hose from an auto parts store works perfectly. I got mine from Auto Zone for $1.75.

  • Update to my earlier comment. I didn't like the model you are repairing,as the reservoir is too damn small,so I took it back to the store. I repaired my old WP-65 by cutting the hose below where it cracked near the handle. It was a bitch getting the handle apart,but I managed. Put it back together with silicone sealant.

  • I have your model of Flosser which I will return,partly because I find the water reservoir too damn small. I found the pressure too low for my liking as well,even at the max setting. Of course,my old unit broke near the handle as well. I will try your tips,thanks very much! I think I will glue the handle back together with silicon sealant,as if I ever have to open it again,it will be easier to open.

  • Thanks for the video. However, I tried it and it failed. I used super glue. I will give it more length since I did the cut just to make a clear female female tube union. Maybe with more length it won’t hit the edge of the waterpik male cut.

  • Prying open IS the critical issue. I KNEW I had to shorten the hose and reattach but I cannot get the case open. I'm afraid I'll slice my wrist if I use the thin blade of, say a utility knife.

  • Stick needle nose pliers into the end after you have removed the plastic ring and spring and spread them apart. Worked great, but you might want an extra set of hands or a confined space to make sure the parts don't go flying. I tried the other way and could not open the case. I also did a wrap with clear packing tape to ensure it stayed together.

  • Why didn't you replace the whole Waterpick hose by the surgical hose? I would like to do that replacement. The waterpick hose is terrible and it seems Waterpick wants the buyers to buy their new product. or their new pricey hose!

  • On ebay you can buy a new handle with hose for $8 free shipping. My hose was all dry and falling apart. also a new handle so you don't have to glue anything back cost and time wise much easier. there are 2 screws under the unit where the handpiece with hose disconnects. If you could not get a new one i can understand this method  but the new one is very cheap and a cleaner repair. The whole waterpik unit is not that expensive I think i paid like $40 for it few years ago..

  • It is easier and more practical to buy a Replacement Handle/Hose Assembly for just A$20. I tried reconnecting the hose to the handle, the handle is really hard to pry open, it didn't work after putting back together, it also turns out the hose itself has lost elasticity and broke again. Then I decided to check for the availability of the whole replacement online, found it was only $20. What the hack, I just bought it, easily fitting with just 2 screws at the bottom of the unit.

  • Great vid, was wondering how I was going to fix mine. Is that surgical tubing from a nasal cannula or some other airway tubing? Also have you tested it at full pressure- will the press fit tubing eventually come off if not secured in some way? I will try this as soon as I find some tubing, thanks for your post!

Sígueme en Twitter